Email configuration – Rockwell Automation 193-ETN E1 Plus EtherNet Side Mount Module User Manual User Manual
Page 58
58
Rockwell Automation Publication 193-UM012B-EN-P - June 2011
Chapter 5
The first word in the subject is the Device Name. If a Device Name is not
configured, then the product name attribute from the identity object will be used.
Email Configuration
To be able to send an email, the IP address or the hostname of a Simple Mail
Transfer Protocol (SMTP) server must be configured and notifications must be
selected. Follow these steps to configure an email notification.
1.
In a web browser, enter the IP address of the E1 Plus EtherNet/IP module
in the address bar and press Enter.
2.
Select Administrative Settings
→ email Configuration, and a login
window will appear.
3.
Log in with the username "Administrator" and no password. If desired, a
password can be set within the Administrative Settings tab
Password Configuration.