Ethernet/ip network generic configuration, Place the program in offline mode – Rockwell Automation 193-ETN E1 Plus EtherNet Side Mount Module User Manual User Manual
Page 40
Advertising
![background image](/manuals/578085/40/background.png)
40
Rockwell Automation Publication 193-UM012B-EN-P - June 2011
Chapter 4
3.
Select the desired EtherNet/IP scanner module and click OK.
4.
Enter the desired communication settings and click Finish.
EtherNet/IP Network Generic Configuration
After the controller configuration, the E1 Plus EtherNet/IP Side Mount Module
has to be added to the I/O configuration.
1.
Place the program in Offline mode.
Advertising