Rockwell Automation 193-ETN E1 Plus EtherNet Side Mount Module User Manual - Manual (Page 44)

44 Rockwell Automation Publication 193-UM012B-EN-P - June 2011
Chapter 4
4. In the Connected To Go Online window, click Download.
5. In the Download confirmation window, click Download to download the
configuration to the PLC.
If there are any errors, a warning triangle will be present on the E1 Plus in
the I/O configuration listing.
Double-click the module to view any error that is reported.
Accessing Generic Module Data
With both the controller and EtherNet/IP network configured, the
ControlLogix controller can exchange data with the E1 Plus EtherNet/IP Side
Mount Module.
1. Go online and switch the controller to Remote Run mode.