Rockwell Automation 193-ETN E1 Plus EtherNet Side Mount Module User Manual User Manual
Page 52
Advertising
52
Rockwell Automation Publication 193-UM012B-EN-P - June 2011
Chapter 4
1.
Configure an OPC topic within RSLinx Classic to communicate to the E1
Plus EtherNet/IP Side Mount Module. In the Data Source tab, select
New
to create a new OPC topic name, high light the device to establish
communications with, and press
Apply.
2.
In the Data Collection tab, select the process type
Logix5000 and select
Apply
Advertising