Rockwell Automation 193-ETN E1 Plus EtherNet Side Mount Module User Manual User Manual
Page 53
Advertising
Rockwell Automation Publication 193-UM012B-EN-P - June 2011
53
Chapter 4
3.
Start FactoryTalk View Studio and create a new application. Draw a
numeric display. Right click on the display and select
Connections.
4.
Select the Tag selector tool
to select a tag from the E1 Plus
EtherNet/IP Side Mount Module.
5.
Right click on the project name and select
Refresh All Folders to get an
updated list of topics to read data from.
Advertising