Installation and wiring, Introduction, Chapter – Rockwell Automation 193-ETN E1 Plus EtherNet Side Mount Module User Manual User Manual
Page 7
Rockwell Automation Publication 193-UM012B-EN-P - June 2011
7
Chapter
1
Installation and Wiring
Introduction
The purpose of this chapter is to provide the necessary instructions to successfully
install an E1 Plus EtherNet/IP Module to an E1 Plus Overload Relay and
properly connect to a EtherNet/IP network.
ATTENTION: To prevent electrical shock, disconnect from power
source before installing or servicing. Install in suitable enclosure.
Keep free from contaminants.
ATTENTION: The side mount module contains ESD (electrostatic
discharge) sensitive parts and assemblies. Static control
precautions are required when installing, testing, servicing, or
repairing this assembly. Component damage may result if ESD
control procedures are not followed. If you are not familiar with
static control procedures, refer to Rockwell Automation publication
8000-4.5.2, “Guarding Against Electrostatic Damage”, or any other
applicable ESD protection handbook.
ATTENTION: The purpose of this document is to serve as a guide
for proper installation. The National Electrical Code and any other
governing regional or local code will take precedence. Rockwell
Automation cannot assume responsibility for the compliance or
proper installation of the side mount module or associated
equipment. A hazard of personal injury and/or equipment damage
exists if codes are ignored during installation.
ATTENTION: An incorrectly applied or installed side mount
module can result in damage to the components or reduction in
product life. Wiring or application errors such as supplying
incorrect or inadequate supply voltage, or operating/storing in
excessive ambient temperatures may result in malfunction of the
product.
ATTENTION: Only personnel familiar with the side mount module
and associated machinery should plan to install, set up, and
maintain the system. Failure to comply may result in personal
injury and/or equipment damage.
ATTENTION: This is a Class A product. In a domestic environment,
this product may cause radio interference, in which case, the user
may be required to take adequate measures.