Rockwell Automation 193-ETN E1 Plus EtherNet Side Mount Module User Manual - Manual (Page 37)

Rockwell Automation Publication 193-UM012B-EN-P - June 2011 37
Chapter 4
5. Enter the IP address of the E1 Plus EtherNet/IP Side Mount Module.
6. Click Next.
7. The E1 Plus EtherNet/IP Side Mount Module is now shown as a module
in the I/O configuration.
Accessing Module Data with Add-On Profiles
With both the controller and EtherNet/IP network configured, the
ControlLogix controller can exchange data with the E1 Plus EtherNet/IP Side
Mount Module.