Select e1 plus ethernet module and click ok – Rockwell Automation 193-ETN E1 Plus EtherNet Side Mount Module User Manual User Manual
Page 36
Advertising
36
Rockwell Automation Publication 193-UM012B-EN-P - June 2011
Chapter 4
2.
Right-click on the Ethernet/IP scanner in I/O Configuration and select
New Module to open the Select Module Type window.
3.
Select E1 Plus Ethernet Module and click OK.
4.
Enter a name for the E1 Plus EtherNet/IP Side Mount Module. The name
will create a tag in RSLogix 5000 that can be used to read and write data
from the E1 Plus EtherNet/IP Side Mount Module.
Advertising