Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.2 - Manual (Page 124)

F ACTORY T ALK H ISTORIAN ME M ODULE U SER ’ S G UIDE
114
Establishing a FactoryTalk Historian SE or PI Server
Connection
To establish a connection to the FactoryTalk Historian SE or PI server:
1. Enter the FactoryTalk Historian SE or PI server host name or IP address in the
Host Server field.
This must be a host name or IP address for a single server. FactoryTalk Historian
SE server collectives are not supported.
2. Click [Test Connection] to confirm that the FactoryTalk Historian SE or PI server
can be accessed.
Two indicators confirm that the connection has been established. A green
checkmark appear next to [Test Connection] and an informational message
displays, stating that the connection to the data server has been established.
Depending on which data transfer server you are connected to, one of the
following screens appears.