Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.2 - Manual (Page 48)

F ACTORY T ALK H ISTORIAN ME M ODULE U SER ’ S G UIDE
38
Network Settings
This section displays the current network settings for FactoryTalk Historian ME.
This section displays:
„
MAC Address - unique Media Access Control (MAC) address of the module.
This number cannot be changed.
„
IP Address - Internet Protocol (IP) address of the module. Click Advanced in the
top navigation bar, then click System Settings to configure network settings.
„
IP Configuration - Dynamic Host Configuration Protocol (DHCP) or static IP
address will display. DHCP is the default configuration. Click Advanced in the
top navigation bar, then click System Settings to configure network settings.
„
Link Status - indicates the module’s front Ethernet port is connected successfully.
Security Configuration
This section displays the current security settings for FactoryTalk Historian ME.
For information on changing these settings, see “Working with System Settings”.
For information on changing these settings, see “Managing Security”.