Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.2 - Manual (Page 167)

8 • A DMINISTERING THE M ODULE
157
Rebooting the Module
To reboot the module, click Advanced in the top navigation bar, and then click
Module Shutdown in the left navigation bar. The Module Reboot section displays the
following message:
If you click [Restore Defaults] or [Reset Security] from the AOP, then the FactoryTalk
Historian ME module goes into a pending state that blocks you from restoring the
defaults, resetting security, or rebooting the module from either the AOP or the web
interface before one of the following occurs: the five (5) minute window expires, the
module is physically reset in the chassis, or you power-cycle the module. If you attempt
to reboot the module from the web interface during that interval, the following
informational message appears telling you that that action is not allowed.
For more information about the AOP, please see the associated documentation.