Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.2 - Manual (Page 239)

B • D ATA T RANSFER S AMPLE S CENARIO
229
Initiating Data Transfer
To start the transfer of data to the FactoryTalk Historian SE server, select Configure
Historian from the top navigation bar and then select Data Transfer from the left
navigation bar.
1. Go to the Data Transfer Parameters section and click [Start].
2. The Status section changes from Stopped to Running.
If the FactoryTalk Historian SE server becomes unavailable, the data will continue to
be stored on the module. When the FactoryTalk Historian SE becomes available