Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.2 - Manual (Page 278)

F ACTORY T ALK H ISTORIAN ME U SER ’ S G UIDE
268
Using the AOP Module Properties
Configuration Tab
Users can configure FactoryTalk Historian ME module to restore defaults, reset
security, shut down or start up from the Module Properties window in AOP. Before
clicking any of the buttons on this dialog box, be sure to backup your FactoryTalk
Historian ME configuration. The blue left arrow indicates an 'immediate commit' of
the specified action, overriding the standard Apply functionality.
To open the Module Properties window, right-click on the module name in the left-
side pane.
1. Select Properties.
2. Select the Configuration tab.
Four built-in functions display, and each function requires a user to initiate it.
‡
[Restore Defaults] resets the module back to the factory defaults. All
configuration data, archives, and logs are deleted and reset. From the
keyboard, press [Alt] D.
If you click the Restore Defaults button and then try to refresh your
FactoryTalk Historian ME software, a “no page found” error is displayed.
Click [Help] in the Module Properties dialog for more information.