Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.2 - Manual (Page 279)

D • RSL OGIX 5000 A DD - ON P ROFILE
269
This occurs because the Restore Defaults process takes several minutes to
complete. During that time, your web browser will not be available.
‡
[Reset Security] resets the module security back to Native mode and sets the
piadmin user password to blank. From the keyboard, press [Alt] R.
‡
[Shutdown] shuts down the module for removal. From the keyboard, press
[Alt] U.
Keep in mind that FactoryTalk Historian ME shutdown will take a few
minutes. Before you perform any additional operations on the Configuration
tab, please wait until the shutdown has completed.
‡
[Startup] restarts module operations after a shutdown. From the keyboard,
press [Alt] A.
The message,
Requested message timed out
, will display if
RSLogix 5000 loses communication with the module at boot time. Click [OK]
and retry if you receive this message.
If the FactoryTalk Historian ME module is in safe mode, clicking [Reset Security] will
have no effect. For more information about working in safe mode, see “Repairing
Archives” on page 148.