Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.2 - Manual (Page 216)

F ACTORY T ALK H ISTORIAN ME M ODULE U SER ’ S G UIDE
206
Use this page to do the following:
„
To add a new host, click [New]. Enter the new host name and IP address and click
[Save].
„
To edit a host, select the host in the list and click [Edit] to make the Host Name
and IP Address fields editable. Update the host name and IP address and click
[Save].
„
To delete a host, select the host in the list and click [Delete]. You will be asked to
confirm the deletion. Click [OK] to delete the host.
Restart Services
This page allows you to restart the web configuration server and CIP:
„
Restart webs: click this button to restart the web configuration server process. To
reboot the web configuration server, you must reboot the module by going to
Advanced in the web interface, and clicking Module Shutdown in the left
navigation bar. To restart the web configuration server without rebooting the
entire module, click [Restart]. Please note that the restart is done without
authentication.
„
Restart CIP: click this button to reset the CIP process. To reboot CIP, you must
reboot the module by going to Advanced in the web interface, and clicking
Module Shutdown in the left navigation bar. To restart CIP without rebooting the
entire module, click [Restart]. Please note that the restart is done without
authentication.