Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.2 - Manual (Page 30)

F ACTORY T ALK H ISTORIAN ME M ODULE U SER ’ S G UIDE
20
IE 8 Compatibility Mode Internet Option
If you are using Internet Explorer 8 in compatibility mode, you must enable the
security setting for Include local directory path when uploading files to a server.
FactoryTalk Historian SE Patch
FactoryTalk Historian ME can be integrated with FactoryTalk Historian SE 2.1 after
you have installed the FactoryTalk Historian SE patch. The FactoryTalk Historian SE
patch must be installed on the FactoryTalk Historian SE that will be used with
FactoryTalk Historian ME. You can download the FactoryTalk Historian SE patch
from the Rockwell Knowledgebase at http://support.rockwellautomation.com. Click
the Search Answers tab and search for Answer ID 63530.
Once the patch is installed, the FactoryTalk Activation licenses that support the
FactoryTalk Historian ME-to-FactoryTalk Historian SE (FTMS) point source can be
configured for the FactoryTalk Historian SE server within the FactoryTalk
Administration Console. The FactoryTalk Historian SE patch enables the FTMS
point source support. A license is a prerequisite for FactoryTalk Historian ME-to-
FactoryTalk Historian SE Data Transfer.
In addition, the patch will allow FactoryTalk Historian ME to work with FactoryTalk
Historian SE collecting, storing, analyzing, and visualizing data using reporting tools
such as time-series trends, bar charts, pie charts, pareto, and tabular trends.
Client Tools Software
The FactoryTalk Historian ME Client Tools CD shipped with your module includes:
„
FactoryTalk Services Platform
V2.10.02 CPR 9 SR2 is supported.
„
FactoryTalk Historian Management
If you install the FactoryTalk Historian Management (Admin Console) on a
remote client computer that has no previously installed Admin Console, you must
make a Windows Registry entry to be able to use a Universal Naming Convention
(UNC) path as the current directory. Manually add the key
[HKEY_CURRENT_USER\Software\Microsoft\Command
Processor\DisableUNCCheck REG_DWORD] and set the value to 0x1 (Hex).
„
FactoryTalk Historian ME Rule Editor
„
FactoryTalk Historian ME RSLogix 5000 Module Profile