Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.2 - Manual (Page 258)

F ACTORY T ALK H ISTORIAN ME U SER ’ S G UIDE
248
4. Verify that the proper server is selected in the FactoryTalk Historian ME server
field of the Tag Search dialog. The FactoryTalk Historian ME server field should
contain the module IP address.
5. Type in “*mon*” for the Tag Mask and click [Search].
6. Select the Monitor tag and click [OK]. The complete tag name should appear in
cell B2.
7. Observe that cells B4 and B5 are pre-populated with the start time (five minutes
past) and number of values (20). These values are used when the module is
queried in the next step for Monitor tag values.
8. Select cell A9.
9. From the PI menu, select Compressed Data (Start Time/Number)…