Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.2 - Manual (Page 153)

8 • A DMINISTERING THE M ODULE
143
Restoring the Module from a Backup File
To restore the module to a previous configuration, upload the backup file and click
[Restore Wizard].
The Restore Configuration Wizard will guide you through a restoration process. After
restoring the module configuration, the module will reboot automatically. This may
take a few minutes.
If a backup file is not stored on the module, the [Restore Wizard] button is greyed
out.
1. Stop the module by clicking [Continue].
Restoring the Module Name
When restoring a module, make sure that the restored module’s name is the same as
the original module’s name. When tags are transferred to FactoryTalk Historian SE or
PI server, the tags are appended with the module name. If the restored module’s name
is different, the same tags will be transferred again with a different name.
For example: