Rockwell Automation 1756-IF4FXOF2F ControlLogix High-speed Analog I/O Module - Manual (Page 12)

12 Rockwell Automation Publication 1756-UM005B-EN-P - January 2013
Chapter 1 What is the ControlLogix High-speed Analog I/O Module?
High-speed Analog I/O
Modules in the
ControlLogix System A ControlLogix high-speed analog I/O module mounts in a ControlLogix
chassis and uses a Removable Terminal Block (RTB) or Interface Module (IFM)
to connect all field-side wiring.
Before you install and use your module, do the following:
• Install and ground a 1756 chassis and power supply. Refer to the
publications listed in
Additional Resources on page 10 .
• Order and receive an RTB or IFM and its components for your
application.
Figure 1 - Physical Features of the High-speed Analog I/O Module
IMPORTANT RTBs and IFMs are not included with your module purchase. You must order
them separately. For more information, contact your local distributor or
Rockwell Automation representative.
ControlLogix
Backplane
Connector
Removable
Terminal Block
Indicators
Locking Tab
Slots for
Keying the
RTB
Connector Pins
Top and
Bottom
Guides
41623