Rockwell Automation 1756-IF4FXOF2F ControlLogix High-speed Analog I/O Module - Manual (Page 130)

130 Rockwell Automation Publication 1756-UM005B-EN-P - January 2013
Appendix C Use Message Instructions to Perform Run-time Services and Module Reconfiguration
3. Create a New Tag for the Module Reconfigure service.
4. Complete the following information.
Right-click the question mark (?) to see the menu.
Choose New Tag.
Name the tag Module Reconfigure.
Choose the Base tag type.
Choose the MESSAGE data type.
Choose the controller scope.
Click OK when finished.
IMPORTANT: You can create message tags only with the
controller scope. Use the Scope pull-down menu to choose the
name of the controller project you are currently using.