Rockwell Automation 1756-IF4FXOF2F ControlLogix High-speed Analog I/O Module - Manual (Page 80)

80 Rockwell Automation Publication 1756-UM005B-EN-P - January 2013
Chapter 5 Configure the Module
Edit the Configuration After you set configuration for a module, you can review and change it. You can
change configuration data and download it to the controller while online. This is
called dynamic reconfiguration.
Your freedom to change some configurable features, though, depends on whether
the controller is in Remote Run mode or Program mode.
The editing process begins on the main page.
The Module Properties dialog box appears as shown below.
IMPORTANT Although you can change configuration while online, you must go offline to
add or delete modules from the program.
1. Select I/O Configuration.
2. Right-click to see the menu.
3. Choose Properties.
Click the tab associated
with the parameters to
view or reconfigure.