Rockwell Automation 1756-IF4FXOF2F ControlLogix High-speed Analog I/O Module - Manual (Page 73)

Rockwell Automation Publication 1756-UM005B-EN-P - January 2013 73
Configure the Module Chapter 5
Create a New Module After you have started the application and created a controller project, you must
create a new module. The wizard lets you create a new module and configure it.
When you are offline, you must select a new module.
IMPORTANT You must be offline when you create a new module.
Use this pull-down menu to go offline.
1. Select I/O Configuration.
2. Right-click to see the menu.
3. Choose New Module.