Rockwell Automation 1756-IF4FXOF2F ControlLogix High-speed Analog I/O Module - Manual (Page 71)

Rockwell Automation Publication 1756-UM005B-EN-P - January 2013 71
Chapter
5
Configure the Module
You must configure your module upon installation. The module does not work
until it has been configured.
Use the Logix Designer application to configure your ControlLogix high-speed
analog I/O module. You can accept the default configuration for your module or
specify a custom, point-level configuration specific to your application.
Topic Page
Overview of the Configuration Process 72
Create a New Module 73
Use the Default Configuration 75
Alter the Default Configuration 76
Download New Configuration Data 79
Edit the Configuration 80
Reconfigure Module Parameters in Run Mode 81
Reconfigure Module Parameters in Program Mode 82
View and Change Module Tags 83
IMPORTANT This chapter focuses on configuring high-speed analog I/O modules in a local
chassis. To configure high-speed analog I/O modules in a remote chassis, see
Appendix E .