Rockwell Automation 1756-IF4FXOF2F ControlLogix High-speed Analog I/O Module User Manual
Page 93
Advertising
Rockwell Automation Publication 1756-UM005B-EN-P - January 2013
93
Calibrate the Module
Chapter 6
6.
Command the output channel to produce a low voltage reference level.
7.
Record the voltage measurement shown on your voltage calibrator.
We recommend you use a minimum of four digits beyond the decimal
point.
The software commands the
output channel 0 to produce a low
voltage reference of 0.00V.
Click Next to proceed.
Click Next to proceed.
Advertising