Rockwell Automation 1756-IF4FXOF2F ControlLogix High-speed Analog I/O Module - Manual (Page 129)

Rockwell Automation Publication 1756-UM005B-EN-P - January 2013 129
Use Message Instructions to Perform Run-time Services and Module Reconfiguration Appendix C
To perform a module reconfiguration with the Module Reconfigure message
type, follow these steps.
1. Change module configuration in the tag editor.
2. Add a rung of ladder logic with a ladder element as shown on page 123 .
The following dialog box appears.
Right-click I/O Configuration to see the menu.
Choose Monitor Tags.
Change the configuration.
Type MSG in the Add Ladder Element field.
Click OK.