Rockwell Automation 1756-IF4FXOF2F ControlLogix High-speed Analog I/O Module - Manual (Page 81)

Rockwell Automation Publication 1756-UM005B-EN-P - January 2013 81
Configure the Module Chapter 5
Reconfigure Module
Parameters in Run Mode Your module can operate in Remote Run mode or Run mode. You can change
any configurable features that are enabled by the software only in Remote Run
mode.
If any feature is disabled in either Run mode, change the controller to Program
mode and make the necessary changes.
For example, the following example shows the configuration page while the
high-speed analog module is in Run mode.
Make the necessary configuration
changes. In this example, all
configurable features are enabled in
Run mode.
Click OK to transfer the new
data and close the dialog box. Click Apply to transfer the new data
and keep the dialog box open.