Rockwell Automation 1756-IF4FXOF2F ControlLogix High-speed Analog I/O Module - Manual (Page 98)

98 Rockwell Automation Publication 1756-UM005B-EN-P - January 2013
Chapter 7 Troubleshoot the Module
Use the Logix Designer
Application to Troubleshoot In addition to the status indicators on the module, the application will alert you
to fault conditions. You will be alerted in one of three ways:
• Warning icon next to the module in the I/O Configuration tree
• Status on the Module Info page
• Fault message in the status line
• Notification in the tag editor
The examples below show fault notification. Diagnostic faults are reported only
in the tag editor.
Warning icon when a
communication fault occurs or if the
module is inhibited.
Notification in Tag Editor
A fault has occurred for any point that
lists the number 1 in the Fault line.
Fault Message in Status Line
Warning Signal in I/O Configuraton Tree
Status line provides information on
the connection to the module.
Status section lists major and minor faults
and the internal state of the module.
Warning icon—The module in slot 4 has a communication fault.