Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility - Manual (Page 15)

1–7 Introducing the PanelView 1200/1400e Transfer Utility
Publication 2711E-6.8 – January 1998
PanelView 1200/1400e Transfer Utility and WINtelligent LINX
The PanelView 1200/1400e Transfer Utility supports WINtelligent
LINX network drivers, Version 5.20.00 or later. The PanelView
1200/1400e Transfer Utility supports a subset of the WINtelligent
LINX drivers—those used for appropriate DH+, ControlNet, and
serial transfers. You can use these drivers to transfer files over DH+,
ControlNet, RIO Pass-Through, or serial connection networks.
Contact your Allen-Bradley Sales Representative for more
information on WINtelligent LINX.
To use the WINtelligent LINX drivers, install them before setting up
transfer communications. The PanelView 1200/1400e Transfer
Utility displays the WINtelligent LINX drivers as driver options, but
you can use them only if they are installed. Make sure the driver you
select is configured correctly for the communication device and
settings. You can open the WINtelligent LINX configuration utility
from the Transfer Utility to configure your selected driver.
Refer to the WINtelligent LINX for Allen-Bradley Programmable
Controllers User’s Guide (Publication Number 9352-WABUG) for
complete information.
Important: The PanelView 1200/1400e Transfer Utility works with
INTERCHANGE only, WINtelligent LINX only, or
with both INTERCHANGE and WINtelligent LINX
installed on the same computer.
PanelView 1200/1400e Transfer Utility and RSLinx
The Transfer Utility does support RSLinx network drivers, Version
1.7 or later. RSLinx is included on floppy disks with your
PanelBuilder 1400e software package (A-B Catalog Number
2711E-ND1) or Transfer Utility software package (A-B Catalog
Number 2711E-ND7). The PanelView 1200/1400e Transfer Utility
supports a subset of the RSLinx drivers—those used for appropriate
DH+, ControlNet, Ethernet, or serial transfers. You can use these
drivers to transfer files over DH+, ControlNet, Ethernet, Remote I/O
Pass-Through, or serial connection networks. Refer to the RSLinx
user documentation for more information.
If you use RSLinx drivers, install them before setting up transfer
communications. The PanelView 1200/1400e Transfer Utility
displays the RSLinx drivers as driver options, but you can use them
only if they are installed. Make sure the driver you select is
configured correctly for the communication device and settings. You
can open the RSLinx configuration utility from the Transfer Utility
to configure your selected driver.
FTU
FTU32