Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility - Manual (Page 36)

2–21
Publication 2711E–6.8 – January 1998
The PanelView 1200/1400e Transfer Utility (FTU32) Version 4 runs
on Windows NT or Windows 95.
This section describes how to start the program from Windows NT
and Windows 95. Screen illustrations in this manual are from the
Windows NT environment. Functionality of the transfer utility is the
same for Windows NT and Windows 95.
To start FTU32 from Windows NT or Windows 95:
1. Click the Start button from the taskbar.
2. Choose Programs, and choose PanelBuilder 1400e or the folder
you specified when you installed the program.
3. Choose PanelView 1200/1400e Transfer Utility. The following
dialog box is displayed.
If you have problems running the File Transfer Utility and you
have had previous versions of the File Transfer Utility on your
computer, we recommend you select “Uninstall Transfer Utility”
in the PanelBuilder 1400e folder. The “Uninstall Transfer Utility”
program deletes any of the shared files and windows system file
conflicts that may exist from earlier installations. You will then
have to reinstall the File Transfer Utility software again. If
problems still exist, contact Allen-Bradley Technical Support. For
Technical Support information, see the Preface in this manual.
Starting the PanelView
1200/1400e Transfer Utility
Version 4 (FTU32)