Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility - Manual (Page 45)

3–6 Uploading 1000e/1200e/1400e Application Files and Alarm History Files
Publication 2711E-6.8 – January 1998
5. Choose OK.
6. If Application is the Address Source, switch the PanelView
terminal to Run mode. The application starts to run. You can now
transfer application files over the selected network.
If RIO Pass-Through is the Address Source, switch the
PanelView terminal to Run mode. The Application Transfer
screen is displayed. You can now transfer application files over
the selected network.
To configure the PanelView 1200/1400e Transfer Utility for the upload:
1. In the PanelView 1200/1400e Transfer Utility, choose Upload
Application from the Transfer menu or from the toolbar.