Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility User Manual
Page 53
![background image](/manuals/580171/53/background.png)
4–2
Downloading 1000e/1200e/1400e Application Files
Publication 2711E-6.8 – January 1998
3. To change the settings, press the Baud Rate, Parity, or Error
buttons to move the check mark to the setting you want.
•
Baud Rate
ĊThe speed at which data is transmitted over the
serial cable. The default setting for a serial transfer is
9600 baud.
•
Parity
ĊUsed for checking data transferred between the
development computer and terminal. The default setting is
None.
•
Error
ĊUsed to check for errors in data transmission and is
either
CRC
Ċcyclical (or cyclic) redundancy check.
BCC
Ċblock check character. BCC is the default setting.
4. When you have selected the required settings, press OK to exit
this screen.
5. To download an application serially, press the Transfer
Application button on the Terminal Configuration screen to
display the Transfer Application screen.
The following Transfer Application screen is shown.