Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility - Manual (Page 28)

2–13
Publication 2711E–6.8 – January 1998
The CD-ROM includes two install versions for the File Transfer
Utility software:
•
Version 3—This version offers you File Transfer Utility on an
operating system that uses 3.1 or later, or Windows 95.
Version 3 supports PanelView application file transfers over
networks using INTERCHANGE and WINtelligent LINX
software drivers.
•
Version 4—This version offers you File Transfer Utility on an
operating system that uses Windows 95 or Windows NT.
Version 4 supports PanelView application file transfers over
networks using RSLinx software drivers.
Version 4 for the Windows 95 operating system is recommended.
If you choose Version 3, refer to “Installing FTU from CD-ROM
on Windows 95 or Windows 3.x” in this chapter for instructions.
Otherwise, continue by selecting Version 4, and then choose
Next.
If you are installing on Windows NT, the Select Components
dialog box does not appear. Version 4 is automatically selected.
6. In the Choose Applications dialog box, choose File Transfer
Utility as the application you want to install. You can choose
more than one application to install. Then choose Next.