Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility User Manual
Page 46
3–7
Uploading 1000e/1200e/1400e Application Files and Alarm History Files
Publication 2711E-6.8 – January 1998
2. The Upload Application dialog box is different for the FTU and
FTU32.
•
In the File Name field, type the path and name of the upload
file, or choose Browse to find a file you want to overwrite on
the disk.
•
In the Path and File fields, type the full path and name of the
upload file, or choose Browse to find a file you want to
overwrite on the disk. The file name and extension are
optional.
If no file name is specified, or you specify *.*, or you leave the
field blank, the default name is the name of the application at the
terminal and the default extension is .pvd.
If no path name is specified, the default path is the current path
where the FTU or FTU32 is installed.
3. When you have finished specifying path and name, configure
communications settings for the transfer following instructions in
Chapter 5, Configuring Communications Settings for
1000e/1200e/1400e Application Transfers.
4. Choose Save Options to save the file names to use for subsequent
uploads. Settings are retained across uploads and invocations of
the PanelView 1200/1400e Transfer Utility.
To initiate the application file upload:
"
Choose the Start button.
A progress bar indicates the status of the upload on both the
PanelView terminal and development computer.
If an error occurs during the upload process, see Chapter 6,
Troubleshooting for the PanelView 1200/1400e Transfer Utility.
FTU32
FTU