Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility - Manual (Page 37)

2–22
Publication 2711E–6.8 – January 1998
The PanelView 1200/1400e Transfer Utility Version 3 (FTU) includes
two utilities that can be accessed from the same icon:
•
the Transfer Utility for the PanelView 1000e/1200e/1400e
terminals that is activated from toolbar buttons.
•
the PanelView 1200 Transfer Utility that can be selected from the
Transfer menu bar.
This section describes how to start the program from Windows 3.x
and Windows 95. Screen illustrations in this manual are from the
Windows 3.1 environment. Functionality of the transfer utility is the
same for Windows 3.x and Windows 95.
To start FTU from Windows 3.x:
1. Double-click the PanelBuilder 1400e program group (or the
program group you selected when you installed the software).
2. Double-click the PanelView 1200/1400e Transfer Utility icon.
If you have problems running the File Transfer Utility, check the
Readme.txt file for potential system conflicts, and contact
Allen-Bradley Technical Support. For Technical Support
information, see the Preface in this manual.
To start FTU from Windows 95:
1. Click the Start button from the taskbar.
2. Choose Programs, and choose PanelBuilder 1400e or the folder
you specified when you installed the program.
3. Choose PanelView 1200/1400e Transfer Utility. The following
dialog box is displayed.
Starting the PanelView
1200/1400e Transfer Utility
Version 3 (FTU)