Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility - Manual (Page 52)

Chapter
4
Publication 2711E-6.8 – January 1998
Downloading
1000e/1200e/1400e
Application Files
This chapter describes how to download application files using the
various transfer methods described in Chapter 2, Working with the
PanelView 1200/1400e Transfer Utility.
For file transfers over ControlNet, DH+, or Remote I/O
Pass-Through, be sure the PanelView terminal address is correct,
otherwise the transfer could corrupt data used by the PLC.
For details on how to download PanelView 1200 application files,
see the PanelView 1200 Transfer Utility User Manual (Publication
Number 2711-811).
You can perform network file transfers or serial transfers. For serial
transfers, you can download PanelView 1000e/1200e/1400e
application files when you connect the PanelView terminal to a
computer with the Upload/Download cable (Allen-Bradley Catalog
Numbers 2706-NC13, 2711-NC13, 2711-NC14 for PanelView 1000e
terminals; 2711-NC1 for PanelView 1200e/1400e terminals).
To download application files, you must:
•
prepare the PanelView terminal for the download. This section
provides procedures on how to prepare a PanelView terminal for
a serial, network direct, or RIO Pass-Through download.
•
configure the PanelView 1200/1400e Transfer Utility for the
download
•
initiate the application file download
To prepare the PanelView terminal for a serial download:
1. Switch the PanelView terminal to the Configure mode, using the
hardware keyswitch or the Goto Configure Mode button.
2. At the PanelView terminal, press the Transfer Setup button on the
Terminal Configuration screen to display the Transfer Setup
screen.
Downloading PanelView
1000e/1200e/1400e
Application Files