Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility - Manual (Page 30)

2–15
Publication 2711E–6.8 – January 1998
If you are installing on Windows NT, the entry
C:\Program Files\Rockwell Software\RDM
is required in the PATH variable in the Environment tab of the
System Properties dialog.
Choose Next to approve and continue.
14. The setup utility shows a summary of the choices you made in the
preceding dialog boxes. To make any changes, choose the Back
button. Otherwise, choose Next to begin the installation.
15. After all the applications have completed installing, you will be
prompted to reboot your computer. You may reboot immediately
or later, but you must reboot before you can run the File Transfer
Utility or other applications successfully.
After you finish installing the File Transfer Utility and you want
to upload or download PanelView files over the PLC networks,
you also need to install RSLinx Lite software, which is provided
on 3.5-inch floppy disks. See the RSLinx user documentation
provided for installation procedures.
Do not cancel the installation while it is in progress. If you want to
undo the installation, let the installation finish, then use the Uninstall
Transfer Utility to remove all the installed files and to update the
registration.
PanelView 1200/1400e Transfer Utility Version 3 (FTU) is provided
on the PanelBuilder 1400e CD-ROM. The software installation
program creates a directory on your hard drive for the FTU and
copies all necessary files to it. By default, the drive and directory is
C:\AB\PB1400E\FTU. You can change this default.
To install FTU:
1. Start Windows 95 or Windows 3.x. If you’re already in Windows,
close all open Windows applications.
2. Insert the CD-ROM in the drive.
The CD-ROM begins to run automatically.
3. If the install does not start automatically and you are running on
Windows 95, choose Run from the Start button and select
setup.exe from the CD-ROM drive; or select setup.exe from
Windows Explorer.
Installing FTU from
CD-ROM on Windows 95
or Windows 3.x