Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility - Manual (Page 34)

2–19
Publication 2711E–6.8 – January 1998
After you finish installing the File Transfer Utility and you want
to upload or download PanelView files over the PLC networks,
you also need to install RSLinx Lite software, which is provided
on 3.5-inch floppy disks. See the RSLinx user documentation
provided for installation procedures.
Do not cancel the installation while it is in progress. If you want to
undo the installation, let the installation finish, then use the Uninstall
Transfer Utility to remove all the installed files and to update the
registration.
PanelView 1200/1400e Transfer Utility Version 3 (FTU) is provided
in the PanelView 1200/1400e Transfer Utility kit (2711E-ND7) on
two disks. Before installing the software, make a backup copy of the
disks. Store the original disks in a safe place, and install the FTU
from the copy.
FTU is also provided on the PanelBuilder 1400e CD. You can obtain
3.5-inch floppy disks by creating them from the CD. For instructions
on how to create floppy disks of the software from the CD, refer to
the Readme file, titled Floppies.txt, in the root directory of the
PanelBuilder 1400e CD.
To install FTU:
1. Start Windows 95 or Windows 3.x. If you’re already in Windows,
close all open Windows applications.
2. Insert the floppy disk in the drive.
3. If you are running on Windows 95, choose Run from the Start
button and enter a:\setup.exe, or select a:\setup.exe from
Windows Explorer.
If you are running on Windows 3.x, choose Run from the File
menu. In the Run window, type:
a:setup or b:setup
where a or b is the drive containing the PanelView 1200/1400e
Transfer Utility disk, and press
ENTER .
Installing FTU from Floppy
Disks on Windows 95 or
Windows 3.x