Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility - Manual (Page 31)

2–16
Publication 2711E–6.8 – January 1998
If you are running on Windows 3.x, choose Run from the File
menu. In the Run windows, type:
d:setup
where d is the drive containing the File Transfer Utility
CD-ROM, and press Enter.
4. In the Welcome dialog box, choose Next.
5. If you are installing on Windows 95, the Select Components
dialog box appears. Choose Version 3, and then choose Next.
If you are installing on Windows 3.x, the Select Components
dialog box does not appear. Version 3 is automatically selected.
6. In the Choose Applications dialog box, choose File Transfer
Utility as the application you want to install. You can choose
more than one application to install. Then choose Next.
7. In the Welcome dialog box for the File Transfer Utility, it
recommends that you close all open Windows applications. If you
have done that, choose Next.
8. In the registration window, enter the required information. You
can obtain registration information from the software registration
card that is in your PanelBuilder 1400e package. Choose Next.