System requirements, Chapter – Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility User Manual
Page 16
Chapter
2
Publication 2711E–6.8 – January 1998
Working with the PanelView
1200/1400e Transfer Utility
This chapter provides instructions for setting up and using the
PanelView 1200/1400e Transfer Utility, including:
•
minimum hardware and software requirements
•
installing and starting the PanelView 1200/1400e Transfer Utility
•
exiting from the PanelView 1200/1400e Transfer Utility
The PanelView 1200/1400e Transfer Utility has context-sensitive
online help that you can access at any time by pressing
F1
on your
keyboard. For general help, click the icon
in the utility’s
toolbar.
For information on how to set up and use the PanelView 1200
Transfer Utility, see the PanelView 1200 Transfer Utility User
Manual (Publication Number 2711-811).
You need the following hardware and software to install the
PanelView 1200/1400e Transfer Utility from the disks.
Hardware and Software Requirements
Requirements
FTU
FTU32
Hardware
A personal computer with a 25-MHz, 386-DX or higher
microprocessor, with a recommended minimum of
8-MB RAM
A personal computer with a 50-MHz, 486-DX or higher
microprocessor, with a recommended minimum of
16-MB RAM
CD-ROM drive (recommended)
CD-ROM drive (recommended)
A fixed disk with 10 MB of free space
A fixed disk with 10 MB of free space
An 8-MB swap file
An 8-MB swap file
A 3.5-inch high-density (1.44-MB) disk drive
A 3.5-inch high-density (1.44-MB) disk drive
An RS-232 serial port for uploading or downloading
applications, or other communication cards listed later
in this chapter
An RS-232 serial port for uploading or downloading
applications, or other communication cards listed later
in this chapter
A standard VGA (640 by 480) display adapter
configured for at least 16 colors
A standard VGA (640 by 480) display adapter
configured for at least 16 colors
A mouse or pointing device supported by Windows
A mouse or pointing device supported by Windows
Software
Microsoft Windows Version 3.x or Windows 95
Microsoft Windows NT Version 4.0, or Windows 95
Microsoft MS-DOS Version 3.3 or above
System Requirements