Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility - Manual (Page 38)

2–23
Publication 2711E–6.8 – January 1998
If you have problems running the File Transfer Utility and you
have had previous versions of the File Transfer Utility on your
computer, we recommend you select “Uninstall Transfer Utility”
in the PanelBuilder 1400e folder. The “Uninstall Transfer Utility”
program deletes any of the shared files and windows system file
conflicts that may exist from earlier installations. You will then
have to reinstall the File Transfer Utility software again. If
problems still exist, contact Allen-Bradley Technical Support. For
Technical Support information, see the Preface in this manual.
For details on how to use the toolbar buttons, see Chapter 3,
Uploading 1000e/1200e/1400e Application Files and Alarm History
Files, and Chapter 4, Downloading 1000e/1200e/1400e Application
Files, in this manual.
The procedure to start the PanelView 1200 Transfer Utility is the
same for Windows 95 and Windows 3.x. This utility, available in
FTU Version 3 and earlier, is used to transfer an application created
in PanelBuilder Development Software for DOS, or PanelBuilder
1200 Configuration Software for Windows. Refer to the PanelView
1200 Transfer Utility User Manual (Publication Number 2711-811)
for more information.
1. Start the PanelView 1200/1400e Transfer Utility using the
method previously described for your operating system.
2. Choose PanelView 1200 Transfer from the Transfer menu. The
following screen is displayed.
Activating the PanelView
1200/1400e Transfer Utility
Starting the PanelView
1200 Transfer Utility