Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility User Manual
Page 43
Advertising
3–4
Uploading 1000e/1200e/1400e Application Files and Alarm History Files
Publication 2711E-6.8 – January 1998
In the examples below, the first screen displays a ControlNet
Direct transfer. The second screen displays a DH+ Direct transfer.
5. Choose OK.
6. If Application is the Address Source, switch the PanelView
terminal to Run mode. The application starts to run. You can now
transfer application files over the selected network.
If Network Direct is the Address Source, switch the PanelView
terminal to Run mode. The Application Transfer screen is
displayed. You can now transfer application files over the
selected network.
Advertising