Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility - Manual (Page 32)

2–17
Publication 2711E–6.8 – January 1998
9. Choose the drive and directory in which the FTU will be
installed. By default, this is C:\AB\PB1400E\FTU. To change the
destination drive or directory, type the new drive and/or directory
in the Program Files field. Then choose Next.
10. Choose the program folder (program group) in which you want to
install the FTU’s icons, which includes a Readme file icon, the
Transfer Utility icon, and an Uninstall icon. By default, the icons
are installed in the PanelBuilder 1400e program folder. Then
choose Next.
11. Choose whether the installation utility will modify the
AUTOEXEC.BAT file. The entry
C:\RSI\CMN
is required in the PATH variable for the FTU to work correctly.
Then choose Next.
12. The setup utility shows a summary of the choices you made in the
preceding dialog boxes. To make any changes, choose the Back
button. Otherwise, choose Next to begin the installation.
13. After all the applications have completed installing, you will be
prompted to reboot your computer. You may reboot immediately
or later, but you must reboot before you can run File Transfer
Utility or other applications successfully.
After you finish installing the File Transfer Utility and you want
to upload or download PanelView files over the PLC networks,
you also need to install INTERCHANGE or WINtelligent LINX
software. If you do not have this software, contact Allen-Bradley
Technical Support for assistance.
Do not cancel the installation while it is in progress. If you want to
undo the installation, let the installation finish, then use the Uninstall
Transfer Utility to remove all the installed files and to update the
registration.
PanelView 1200/1400e Transfer Utility Version 4 (FTU32) is
provided in the PanelView 1200/1400e Transfer Utility kit (A-B
Catalog Number 2711E-ND7) on two disks. Before installing the
software, make a backup copy of the disks. Store the original disks in
a safe place, and install the FTU32 from the copy.
FTU32 is also provided on the PanelBuilder 1400e CD. You can
obtain 3.5-inch floppy disks by creating them from the CD. For
instructions on how to create floppy disks of the software from the
CD, refer to the Readme file, titled Floppies.txt, in the root directory
of the PanelBuilder 1400e CD.
Installing FTU32 from
Floppy Disks on Windows
NT or Windows 95