Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility - Manual (Page 23)

2–8
Publication 2711E–6.8 – January 1998
Figure 2.5 ControlNet Network Direct Download (with
1784-KTC or KTCX card)
Remote I/O Pass-Through Transfers
The Remote I/O Pass-Through feature enables you to download a
PanelBuilder Remote I/O application file from your computer over
the Data Highway Plus (DH+), ControlNet, or Ethernet networks and
then over the Remote I/O network, to a PanelView terminal. You can
do this without connecting the serial cable to the terminal and
without going from terminal to terminal with a PC.
You need the same equipment for Remote I/O Pass-Through
transfers over either DH+ or ControlNet as listed previously for the
two networks. In addition, you need one of the following: