Rockwell Automation 2711E-ND7 PanelView 1400E File Transfer Utility - Manual (Page 18)

2–3
Publication 2711E–6.8 – January 1998
Catalog Number Description Product
2711-NC13 Upload/Download Cable For 1000/1000e terminals only. Includes a
9-pin RS-232 serial cable (Upload/Download
cable) to transfer files between terminal and
development computer. The cable is 16.4 ft
(5 m) long.
2711-NC14 Upload/Download Cable For 1000/1000e terminals only. Includes a
9-pin RS-232 serial cable (Upload/Download
cable) to transfer files between terminal and
development computer. The cable is 32.7 ft
(10 m) long.
2706-NC13 Upload/Download Cable For 1000/1000e terminals only. Includes a
9-pin RS-232 serial cable (Upload/Download
cable) to transfer files between terminal and
development computer. The cable is 10 ft
(3 m) long.
This section describes the equipment required to perform the
following application transfers:
•
serial transfer
•
DH+ network direct transfer
•
ControlNet network direct transfer
•
Remote I/O Pass-Through transfer
Serial Upload/Download
To transfer applications serially, you need an RS-232 Serial
(Upload/Download) cable (A-B Catalog Numbers 2706-NC13,
2711-NC13, 2711-NC14 for PanelView 1000e terminals; 2711-NC1
for PanelView 1200/1200e/1400e terminals) for connecting the
computer to the PanelView terminal.
The 1200e/1400e Transfer Utility can transfer applications serially
without using the RSLinx drivers.
Both the 1200 and 1200e/1400e Transfer Utility can transfer
applications serially without using INTERCHANGE or WINtelligent
LINX drivers. For information on PanelView 1200 serial transfers,
see the PanelView 1200 Transfer Utility User Manual (Publication
Number 2711-811).
FTU32
FTU
Equipment Required for
Transferring Applications