Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive (A Frame) - ForGe Control (PanelView 550) - Manual (Page 108)

3-48 Operator Interface
7000A-UM151D-EN-P – March 2013 7000 “A” Frame
To confirm the operation, press the [F8] key to proceed, or the [F9]
key to abort. Saving the data will overwrite the previously stored
data in the NVRAM.
Load
The changes that you stored in NVRAM are automatically used each
time the drive is powered up. If you make changes to the data in the
drive (without saving) and then wish to use the previously stored
data, press the [F4] key (Figure 3.66).
Figure 3.66 – Load Operation
To confirm the operation, press the [F8] key to proceed, or the [F9]
key to abort. Loading the data will overwrite the data currently
being used by the drive.
Display Parameters The parameters of the drive can be displayed, continually showing
the value contained in the drive. From the Top Level Menu, press the
[F4] key. The DISPLAY GROUP screen of Figure 3.67 is displayed.
The screen shows one or more pages of groups that can be displayed.
The number of groups displayed depends on the current access level.
Using the [cursor up] and [cursor down] keys select the group you
wish to display and press the [enter] key (Figure 3.68).
Figure 3.67 – Display Screen