Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive (A Frame) - ForGe Control (PanelView 550) User Manual
Page 97
![background image](/manuals/580180/97/background.png)
Operator Interface 3-37
7000 “A” Frame
7000A-UM151D-EN-P – March 2013
Use the up/down cursor keys to scroll onto these additional options.
Press the [enter] key to accept the new value as shown in Figure
3.47.
Figure 3.46 – Option List Viewed on Multiple Pages
Figure 3.47 – Modification Completed
The new value is not sent to the drive until you exit the screen with
the [F10] key. Prior to this you can modify the new value by
repeating the above procedure, or you can cancel the change by
pressing the [F7] key. The CANCEL operation returns the new
value to that of the actual value.
Bit Encoded Value
When the parameter is a bit encoded value, the MODIFY
PARAMETER screen typical of Figure 3.48 will be displayed. This
screen shows:
•
the name of the parameter for which you are make the changes
(i.e. Logic Mask)
•
the tag code for the parameter (i.e. 241)
•
the name of the bit currently selected (Adapter 0)
•
the actual value of the parameter bits contained in the drive.