Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive (A Frame) - ForGe Control (PanelView 550) - Manual (Page 79)

Operator Interface 3-19
7000 “A” Frame 7000A-UM151D-EN-P – March 2013
Figure 3.17 – Edit the Text
When editing is complete, the screen will appear as in Figure 3.18.
Figure 3.18 – Editing Completed
The operator interface contains a default set of meters. This default
set is selected by pressing the [F2] key any time the 'Meters' screen is
displayed. This results in the default text and tags as shown in
Figure 3.15.
The changes made do not take affect until you press [F10] and exit
the screen. Any time prior to this you may cancel all of the changes
made after coming to the screen by pressing the [F7] key.
The result of selecting the V Line tag for meter 2 (in our example) is
shown in Figure 3.19 after the METERS screen was exited.
Figure 3.19 – Top Level Meter Modified