Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive (A Frame) - ForGe Control (PanelView 550) - Manual (Page 113)

Operator Interface 3-53
7000 “A” Frame 7000A-UM151D-EN-P – March 2013
Help for Alarms
When viewing the fault or warning queue, help text may be
associated with the alarm entry. Use the up/down cursor keys to
highlight the alarm in question and press the [enter] key. An
ALARM HELP screen, typical of that shown in Figure 3.76 will be
shown for that alarm. Not all alarms will have this additional help
text. For those alarms the screen shown in Figure 3.77 is displayed.
Figure 3.76 – Alarm Help
Figure 3.77 – No Alarm Help
Request Printouts When the drive contains the optional printer, you can obtain hard
copies of the data that you are able to view on the terminal. The
printouts are requested from the PRINTER screen. Press [F3] while
displaying the Top Level Menu.
The screen typical of Figure 3.78 is displayed. It shows the current
status of the printer (A-B part #80025-290-01) and the type of
reports that are available. (Refer to the “Syntest SP401 Thermal
Printer User Manual” for information regarding the use of the printer
hardware and a description of the various reports available.) Using
the [cursor up] and [cursor down] keys, select the desired report and
press the [enter] key. The report will be sent to the printer.