Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive (A Frame) - ForGe Control (PanelView 550) - Manual (Page 125)

Operator Interface 3-65
7000 “A” Frame 7000A-UM151D-EN-P – March 2013
PCMCIA Memory Card Description
Installation Data
The memory card slides into the card slot located on the backside of
the PowerFlex 7000 drive operator interface. These instructions show
how to insert the card in the Operator interface.
W A R N I N G W A R N I N G The memory card should be kept free from
moisture, extreme temperatures, and direct
sunlight. Failure to observe this caution could
result in damage to the card.
W A R N I N G W A R N I N G Do not subject memory card to flexing or
extreme shock. Failure to observe this caution
could result in damage to the card.
Installing the Memory Card
1.
Locate the vertical card slot on the back of the operator interface.
See Figure 3.88.
COMMUNICATION CABLE
CARD SLOT
Figure 3.88 – Rear View of Operator Interface