Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive (A Frame) - ForGe Control (PanelView 550) - Manual (Page 186)

A-2 Commissioning
7000A-UM151D-EN-P – March 2013 7000 “A” Frame
13. Apply medium voltage to the drive and perform operational
checks.
14. Bump motor and tune drive to the system attributes. (If the
load is unable to handle any movement in the reverse direction
the load should be uncoupled prior to bumping the motor for
directional testing).
15. Run the drive motor system throughout the operational range
to verify proper performance.
Please Note: Customer personnel will be required on-site to
participate in the start-up of the system.
Start-up Commissioning
Services (cont.)